|
|
|
| EV Parts > Motor Drive Kits |
|
Electric Motorsport drive kits save you time and money by providing all of the necessary components needed to build an electric drive system at a discounted price. We offer 2 different types of kits, unassembled do-it-yourself kits, as well as preassembled drive systems ready for immediate implementation.
Ordering a drive system is simple. First decide which motor best fits your preformance requirements, then choose your controller, type of throttle, and contactor coil voltage. In general, the contactor's coil voltage should match the nominal voltage of your battery pack.
We know that it may be difficult to decide which electric drive system will best suit your project and meet your performance expectations. Therefore, please review and submit a land vehicle worksheet or marine craft worksheet before you call or email us with questions about which product to choose. This will help us understand your requirements and provide you with the correct information.
|
Land Vehicle Worksheet |
Marine Craft Worksheet |
|
Unless otherwise specified, drive kits include the following items: |
Motor
|
Controller |
Throttle |
Contactor |
Wire & Terminal Kit |
Fuse & Holder |
Please note: Kit items pictured are subject to change from kit to kit and due to part availability.. |
|
| *Horsepower ratings are represented as peak values |
Motor Specs
Brush-Type Permanent Magnet DC Motor
Power: 4 cont-- 12.8 pk hp
Voltage: 12-48 Volt rated
Speed: 2150-4850 rpm0
Size: 6" OD, (w/o shaft)
Shaft: 7/8"x 1-3/4", 3/16" key
Motor Weight: 24 lbs.
P/N: ME0909 |
| EMC-ME0909 Drive
Kit |
|
Application:
Mini-bikes, Scooters, Go-karts, Ride-on trains, Robots
Included in Kit:
Motor, Controller, Throttle, Contactor, Wire Kit, Fuse and Fuse Holder
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
Brush-Type Permanent Magnet DC Motor
Power: 8 cont-- 15 pk hp
Voltage: 48 Volt rated
Speed: 3500 rpm @ 48v unloaded
Size: 8" OD, 5.5" long (w/o shaft)
Shaft: 7/8"x 1-3/4", 3/16" key
Motor Weight: 28 lbs
P/N: ME0708
|
| EMC-R Drive
Kit |
|
Application:
Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, or Robots.
Included in Kit:
Motor, Controller, Throttle, Contactor, Wire Kit, Fuse and Fuse Holder
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
Brushless Permanent Magnet AC Motor
Power: 6 Hp continuous, 15 peak Hp
Voltage: 24-48V
Voltage Constant: 70 RPM/VDC.
Torque Constant: 1.20" lbs/amp.
Max Motor Current: 300 A/1min.
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key
Motor Weight: 22 lbs
NEW Sine/Cosine sesor (smoother running)
NEW High speed rotor
NEW Bi-directional fan
NEW Rugged aluminum fan cover
Temperature sensor
Motor P/N: ME1117
|
PMAC-SSR V2 36/48V 275A
Brushless Drive
Kit
|
|
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Industrial Automation, etc.
Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
AC Induction Motor
Diameter: 6.7 in
Weight: 46 lbs.
Voltage: 48V
Amp Rating: 650A
Motor efficiency: 89%
Peak Power: 18HP
Torque: 81 ft/lbs
RPM: 7500
|
| AC-9 Drive
Kit |
|
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
Options:
| Application |
Voltage
(V) |
Controller |
Current
(A) |
Peak
Horsepower
|
Torque
(ft./lbs.) |
| C-Face |
48 |
1236-5301 |
350 |
10 |
44 |
| C-Face |
48 |
1238-5601 |
650 |
18 |
81 |
| Golf Cart |
48 |
1236-5301 |
350 |
10 |
44 |
| Golf Cart |
48 |
1238-5601 |
650 |
18 |
81 |
|
Application:
Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, low speed vehicles, Golf Carts, etc.
Included in Kit:
Motor, Controller, Wire
Harness,
Display (Golf cart application comes with controller mounting plate)
Click here for more information >>> |
| Base Price:
|
|
|
|
|
Motor Specs
Brush-Type Permanent Magnet DC Motor
Power: 8 cont-- 19 pk hp
Voltage: 72 Volt rated
Speed: 3700 rpm @ 72V unloaded
Size: 8" OD, 6.5" long (w/o shaft)
Shaft: 7/8"x 1-3/4", 3/16" key
Motor Weight: 36 lbs.
P/N: ME0709
|
| EMC-RT Drive
Kit |
|
Application:
Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, or Robots.
Included in Kit:
Motor, Controller, Throttle, Contactor, Wire Kit, Fuse and Fuse Holder
Click here for more information >>> |
| Base Price:
|
|
|
|
|
Motor Specs
Brushless Permanent Magnet AC Motor
Power: 6 Hp continuous, 19 peak Hp
Voltage: 24-72V
Voltage Constant: 50 RPM/VDC.
Torque Constant: 1.20" lbs/amp.
Max Motor Current: 300 A/1min.
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key
Motor Weight: 22 lbs
P/N: ME0201014201
|
PMAC-SS 72/84V 180A
Brushless Drive
Kit
|
|
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Industrial Automation, etc.
Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.
Click here for more information >>> |
Price: $1,850.00
|
|
|
|
Motor Specs
Brushless Permanent Magnet AC Motor
Power: 6 Hp continuous, 19 peak Hp
Voltage: 24-72V
Voltage Constant: 50 RPM/VDC.
Torque Constant: 1.20" lbs/amp.
Max Motor Current: 300 A/1min.
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key
Motor Weight: 22 lbs
NEW Sine/Cosine sesor (smoother running)
NEW High speed rotor
NEW Improved bi-directional fan
NEW Rugged aluminum fan cover
Temperature sensor
P/N: ME1118
|
PMAC-SS V2 72/84V 180A
Brushless Drive
Kit
|
|
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Industrial Automation, etc.
Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
Brush-Type Permanent Magnet DC Motor
Voltage: 24-72V
Weight: 24.8 lb
Angular-velocity constant: 50.2 rpm/V
Torque constant: 27 ozf·in/A
Terminal resistance: 0.025 Ohm
No-load current: 6A
Rotor Inertia: 1370 oz·in_
Inductance: 19 µH
Continuous current: 110A
10 minute current: 200A
Terminals: 8mm
|
| Perm PMG-132 Drive
Kit |
|
Application:
Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, or Robots.
Included in Kit:
Motor, Controller, Throttle, Contactor, Wire Kit, Fuse and Fuse Holder
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
Brushless Permanent Magnet AC Motor
- 4 pole motor
(8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor.
P/N: ME1012
|
PMAC-DSR 36/48V 450A
Brushless Drive
Kit
|
|
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
Brushless Permanent Magnet AC Motor
- 4 pole motor
(8 magnets).
- Phase to Phase winding resistance is 0.065 Ohms with 20 turns per phase.
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 72 VDC input to the control
- Torque constant of 0.12 Nm per Amp
- The Inductance Phase to Phase is 0.05 Milli-Henry
- Armature Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 60 ft lb.
- Cooling: Open Frame, Fan Cooled motor
- Includes temperature sensor
P/N: ME1114
|
PMAC-G4845 36/48V 450A NEW!
Brushless Drive
Kit
|
|
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
AC Induction Motor
Diameter: 6.7 in
Weight: 46 lbs.
Voltage: 72V
Amp Rating: 550A
Motor efficiency: 89%
Peak Power: 27HP
Torque: 68 ft/lbs
RPM: 7500
|
| AC-12 Drive
Kit |
|
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
Options
| Application |
Voltage
(V) |
Controller |
Current
(A) |
Peak
Horsepower
|
Torque
(ft./lbs.) |
| C-Face |
72 |
1236-6301 |
300 |
16 |
45 |
| C-Face |
72 |
1238-6501 |
550 |
29 |
82 |
| Golf Cart |
72 |
1236-6501 |
550 |
29 |
82 |
|
Application:
Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, low speed vehicles, Golf Carts, etc.
Included in Kit:
Motor, Controller, Wire
Harness,
Display (Golf cart application comes with controller mounting plate)
Click here for more information >>> |
| Base Price:
|
|
|
|
|
Motor Specs
Brush-Type Permanent Magnet DC Motor
Power: 11.5 kW cont-- 23 kW pk
Voltage: 12-72 Volt rated
Speed: 3700 rpm @ 72V unloaded
Size: 8" OD, 7.4 " long (w/o shaft)
Shaft: 7/8"x 1-3/4", 3/16" key
Motor Weight: 39 lbs.
P/N: ME1003
|
| EMC-RT200 Drive
Kit |
|
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, or Robots.
Included in Kit:
Motor, Controller, Throttle, Contactor, Wire Kit, Fuse and Fuse Holder
Click here for more information >>> |
| Base Price:
|
|
|
|
|
Motor Specs
AC Induction Motor
Diameter: 6.7 in
Weight: 46 lbs.
Voltage: 96V
Amp Rating: 650A
Motor efficiency: 89%
Peak Power: 38HP
Torque: 68 ft/lbs
RPM: 7500
|
| AC-15 Drive
Kit |
|
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
Optoins:
| Application |
Voltage
(V) |
Controller |
Current
(A) |
Peak
Horsepower
|
Torque
(ft./lbs.) |
| C-Face |
72 |
1236-6301 |
300 |
15 |
37 |
| C-Face |
72 |
1238-6501 |
550 |
27 |
68 |
| C-Face |
96 |
1238-7601 |
650 |
38 |
81 |
|
Application:
Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, low speed vehicles, Golf Carts, etc.
Included in Kit:
Motor, Controller, Wire
Harness,
Display
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
Brushless Permanent Magnet AC Motor
- 4 pole motor
(8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 6000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor.
P/N: ME0913
|
PMAC-DS 72/84V 350A
Brushless Drive
Kit
|
|
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.
Click here for more information >>> |
| Base Price:
|
|
|
Motor Specs
Brushless Permanent Magnet AC Motor
- 4 pole motor
(8 magnets).
-
Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Torque constant of 0.15 Nm per Amp
- The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
- Armature Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor
- Includes temperature sensor
P/N: ME1115
|
PMAC-G8435 72/84V 350A NEW!
Brushless Drive
Kit
|
|
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.
Click here for more information >>> |
| Base Price:
|
|
|
Motor Specs
Brushless Permanent Magnet AC Motor
- 4 pole motor
(8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 6000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor.
P/N: ME0913
|
PMAC-DS 72/84V 550A
Brushless Drive
Kit
|
|
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.
Click here for more information >>> |
| Base Price:
|
|
|
Motor Specs
Brushless Permanent Magnet AC Motor
- 4 pole motor
(8 magnets).
-
Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Torque constant of 0.15 Nm per Amp
- The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
- Armature Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor
- Includes temperature sensor
P/N: ME1115
|
PMAC-G8455 72/84V 550A NEW!
Brushless Drive
Kit
|
|
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.
Click here for more information >>> |
| Base Price:
|
|
|
Motor Specs
Brushless Permanent Magnet AC Motor
- 4 pole motor
(8 magnets).
-
Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Torque constant of 0.15 Nm per Amp
- The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
- Armature Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC
continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor
- Includes temperature sensor
P/N: ME1115
|
PMAC-G9630 96V 300A NEW!
Brushless Drive
Kit
|
|
This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.
Application:
Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.
Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.
Click here for more information >>> |
| Base Price:
|
|
|
Motor Specs
AC Induction Motor
Diameter: 6.7 in
Weight: 54 lbs.
Voltage: 96V
Amp Rating: 650A
Motor efficiency: 89%
Peak Power: 50HP
Torque: 75 ft/lbs
RPM: 7500
|
| AC-20 Drive
Kit |
|
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
Options:
| Application |
Voltage
(V) |
Controller |
Current
(A) |
Peak
Horsepower
|
Torque
(ft./lbs.) |
| Golf Cart |
48 |
1238-5601 |
650 |
25 |
75 |
| C-Face |
48 |
1238-5601 |
650 |
25 |
75 |
| C-Face |
72 |
1238-6501 |
550 |
37 |
63 |
| C-Face |
96 |
1238-7601 |
650 |
50 |
75 |
|
Application:
Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, low speed vehicles, Golf Carts, etc.
Included in Kit:
Motor, Controller, Wire
Harness,
Display (Golf cart application comes with controller mounting plate)
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
AC Induction Motor
Diameter: 8 in
Weight: 85 lb.
Voltage: 96V
Amp Rating: 650A
Motor efficiency: 89%
Peak Power: 55HP
Torque: 120 ft/lbs
RPM: 6500
|
| AC-35 Drive
Kit |
|
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
Options:
| Application |
Voltage
(V) |
Controller |
Current
(A) |
Peak
Horsepower
|
Torque
(ft./lbs.) |
Dana -
Graziano |
72 |
1238-6501 |
550 |
37 |
101 |
B-Face or
C-Face |
72 |
1238-6501 |
550 |
37 |
101 |
B-Face or
C-Face |
96 |
1238-7601 |
650 |
55 |
120 |
|
Application:
Low speed vehicles, etc.
Included in Kit:
Motor, Controller, Wire
Harness,
Display
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
AC Induction Motor
Diameter: 8 in
Weight: 122 lb.
Voltage: 72-108V
Amp Rating: 650 amp
Motor efficiency: 89%
Peak Power: 67HP
Torque: 110 ft/lbs
RPM: 6500
|
| AC-50 Drive
Kit |
|
These custom-wound AC induction motors can produce an amazing amount of power and torque at excellent levels of efficiency. Some of the benefits of an AC induction motor are a longer power band, higher RPM, regenerative braking, and easy reversing. They do not require contactor pre-charge resistors or diodes.
Options:
| Application |
Voltage
(V) |
Controller |
Current
(A) |
Peak
Horsepower
|
Torque
(ft./lbs.) |
B-Face or
C-Face |
96 |
1238-7601 |
650 |
67 |
110 |
|
Application:
Cars and Light Trucks
Included in Kit:
Motor, Controller, Wire
Harness,
Display
Click here for more information >>> |
| Base Price:
|
|
|
|
Motor Specs
Series Wound DC Motor
Power: 26 KW (35 HP) continuous, 63 KW (85 HP) peak
Voltage: 48 to 144 VDC
Size: 10 " OD,
Shaft: 7/8"x 1-3/4", 3/16" key
Weight: 203 lbs
P/N: ME1002
|
| EMC-SM300 Drive
Kit |
|
The EMC-SM300 (Mars ME1002) is a Series Wound DC motor perfect for lite truck and small car EV conversions. Continuous current of 200 amps, and 550 amps for 2 minutes. Voltages from 48 to 144 VDC. Efficiencies of up to 92%. The power is 26 KW (35 HP) continuous, and 63 KW (85 HP) peak. More powerful than the NetGain Warp 9 and ADC FB1-4001 motors.
Application:
Cars and Light Trucks.
Included in Kit:
Motor and Controller
Click here for more information >>> |
| Base Price:
|
|
|
|
|
|
|
  
|
|
|
|
| | | | |
