EV Parts > Motor Drive Kits

Electric Motorsport drive kits save you time and money by providing all of the necessary components needed to build an electric drive system at a discounted price. We offer 2 different types of kits, unassembled do-it-yourself kits, as well as preassembled drive systems ready for immediate implementation.

Ordering a drive system is simple. First decide which motor best fits your preformance requirements, then choose your controller, type of throttle, and contactor coil voltage. In general, the contactor's coil voltage should match the nominal voltage of your battery pack.

We know that it may be difficult to decide which electric drive system will best suit your project and meet your performance expectations. Therefore, please review and submit a land vehicle worksheet or marine craft worksheet before you call or email us with questions about which product to choose. This will help us understand your requirements and provide you with the correct information.

Land Vehicle Worksheet


Marine Craft Worksheet

For downloadable manuals, datasheets, and diagrams, please refer to the Electric Motorsport Document Library.



Document Library
 
Unless otherwise specified, drive kits include the following items:

Motor

Controller

Throttle

Contactor

Wire & Terminal Kit

Fuse & Holder

Please note: Kit items pictured are subject to change from kit to kit and due to part availability.
Motor Drive Kits

Browse Only:    Brush-Type PM     Brushless PM     AC Induction     Series Wound    Hub    All Motor Kits


*Horsepower ratings are represented as peak values

Motor Specs

Brushless Permanent Magnet AC Motor

Power: 6 Hp continuous, 15 peak Hp
Voltage: 24-48V
Voltage Constant: 70 RPM/VDC.
Torque Constant: 1.20" lbs/amp.
Max Motor Current: 300 A/1min.
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key
Motor Weight: 22 lbs

NEW Sine/Cosine sesor (smoother running)
NEW High speed rotor
NEW Bi-directional fan
NEW Rugged aluminum fan cover
Temperature sensor

Motor P/N: ME1117
PMAC-SSR V2 36/48V 275A
Brushless Drive Kit
15 HP pk.

This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.


Application:

Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Industrial Automation, etc.

Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.

Click here for more information >>>
Base Price:
Controller
Sevcon Gen4 48V 275A w/ Regen.
Nominal Pack Voltage
Throttle
Direction of Forward Rotation
F/R Speed
Full speed clockwise / Half speed counter-clockwise
Full speed counter-clockwise / Half speed clockwise
Full speed clockwise / Full speed counter-clockwise
Application
 
Qty
 


Motor Specs

Brushless Permanent Magnet AC Motor

Power: 6 Hp continuous, 19 peak Hp
Voltage: 24-72V
Voltage Constant: 50 RPM/VDC.
Torque Constant: 1.20" lbs/amp.
Max Motor Current: 300 A/1min.
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key
Weight: 22 lbs

P/N: ME0201014201


PMAC-SS 72/84V 180A
Brushless Drive Kit
19 HP pk.

This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.


Application:

Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Industrial Automation, etc.

Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.

Click here for more information >>>
Price: $1,850.00
Sale Price:
Controller
Sevcon Gen4 72V 180A w/ Regen.
Nominal Pack Voltage
Throttle
Direction of Forward Rotation
F/R Speed
Full speed clockwise / Half speed counter-clockwise
Full speed counter-clockwise / Half speed clockwise
Full speed clockwise / Full speed counter-clockwise
Application
 
Qty
 


Motor Specs

Brushless Permanent Magnet AC Motor

Power: 6 Hp continuous, 19 peak Hp
Voltage: 24-72V
Voltage Constant: 50 RPM/VDC.
Torque Constant: 1.20" lbs/amp.
Max Motor Current: 300 A/1min.
Motor Diameter: 8".
Shaft: 7/8"x 1-3/4", 3/16" key
Motor Weight: 22 lbs

NEW Sine/Cosine sesor (smoother running)
NEW High speed rotor
NEW Improved bi-directional fan
NEW Rugged aluminum fan cover
Temperature sensor

P/N: ME1118


PMAC-SS V2 72/84V 180A
Brushless Drive Kit
19 HP pk.

This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.


Application:

Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Industrial Automation, etc.

Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.

Click here for more information >>>
Base Price:
Controller
Sevcon Gen4 72V 180A w/ Regen.
Nominal Pack Voltage
Throttle
Direction of Forward Rotation
F/R Speed
Full speed clockwise / Half speed counter-clockwise
Full speed counter-clockwise / Half speed clockwise
Full speed clockwise / Full speed counter-clockwise
Application
 
Qty
 


Motor Specs

Brushless Permanent Magnet AC Motor

- 4 pole motor (8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor.

P/N: ME1012


PMAC-DSR 36/48V 450A
Brushless Drive Kit
25 HP pk.

This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.


Application:

Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.

Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.

Click here for more information >>>
Base Price:
Controller
Sevcon Gen4 48V 450A w/ Regen.
Nominal Pack Voltage
Throttle
Direction of Forward Rotation
F/R Speed
Full speed clockwise / Half speed counter-clockwise
Full speed counter-clockwise / Half speed clockwise
Full speed clockwise / Full speed counter-clockwise
Mounting Face
NEMA C-Face
Golf Car / NEV (Dana/Spicer Differential)
Application
 
Qty
 


Motor Specs

Brushless Permanent Magnet AC Motor

- 4 pole motor (8 magnets).
- Phase to Phase winding resistance is 0.065 Ohms with 20 turns per phase.
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 72 VDC input to the control
- Torque constant of 0.12 Nm per Amp
- The Inductance Phase to Phase is 0.05 Milli-Henry
- Armature Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 60 ft lb.
- Cooling: Open Frame, Fan Cooled motor
- Includes temperature sensor

P/N: ME1114


PMAC-G4845 36/48V 450A NEW!
Brushless Drive Kit
25 HP pk.

This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.


Application:

Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.

Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.

Click here for more information >>>
Base Price:
Controller
Sevcon Gen4 48V 450A w/ Regen.
Nominal Pack Voltage
Throttle
Direction of Forward Rotation
F/R Speed
Full speed clockwise / Half speed counter-clockwise
Full speed counter-clockwise / Half speed clockwise
Full speed clockwise / Full speed counter-clockwise
Mounting Face
NEMA C-Face
Golf Car / NEV (Dana/Spicer Differential)
Application
 
Qty
 


Motor Specs

Brushless Permanent Magnet AC Motor

- 4 pole motor (8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 6000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor.

P/N: ME0913

PMAC-DS 72/84V 350A
Brushless Drive Kit
36 HP pk.

This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.


Application:

Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.

Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.

Click here for more information >>>
Base Price:
Controller
Sevcon Gen4 72V 350A w/ Regen.
Nominal Pack Voltage
Throttle
Direction of Forward Rotation
F/R Speed
Full speed clockwise / Half speed counter-clockwise
Full speed counter-clockwise / Half speed clockwise
Full speed clockwise / Full speed counter-clockwise
Application
 
Qty
 


Motor Specs

Brushless Permanent Magnet AC Motor

- 4 pole motor (8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Torque constant of 0.15 Nm per Amp
- The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
- Armature Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor
- Includes temperature sensor

P/N: ME1115

PMAC-G8435 72/84V 350A NEW!
Brushless Drive Kit
36 HP pk.

This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.


Application:

Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.

Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.

Click here for more information >>>
Base Price:
Controller
Sevcon Gen4 72V 350A w/ Regen.
Nominal Pack Voltage
Throttle
Direction of Forward Rotation
F/R Speed
Full speed clockwise / Half speed counter-clockwise
Full speed counter-clockwise / Half speed clockwise
Full speed clockwise / Full speed counter-clockwise
Mounting Face
NEMA C-Face
Golf Car / NEV (Dana/Spicer Differential)
Application
 
Qty
 


Motor Specs

Brushless Permanent Magnet AC Motor

- 4 pole motor (8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 6000 RPM
- Voltage: 0 to 96 VDC input to the control
- Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC continuous (180 Amps DC into the - motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor.

P/N: ME0913

PMAC-DS 72/84V 550A
Brushless Drive Kit
56 HP pk.

This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.


Application:

Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.

Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.

Click here for more information >>>
Base Price:
Controller
Sevcon Gen4 72V 550A w/ Regen.
Nominal Pack Voltage
Throttle
Direction of Forward Rotation
F/R Speed
Full speed clockwise / Half speed counter-clockwise
Full speed counter-clockwise / Half speed clockwise
Full speed clockwise / Full speed counter-clockwise
Application
 
Qty
 


Motor Specs

Brushless Permanent Magnet AC Motor

- 4 pole motor (8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Torque constant of 0.15 Nm per Amp
- The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
- Armature Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor
- Includes temperature sensor

P/N: ME1115

PMAC-G8455 72/84V 550A NEW!
Brushless Drive Kit
56 HP pk.

This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.


Application:

Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.

Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.

Click here for more information >>>
Base Price:
Controller
Sevcon Gen4 72V 550A w/ Regen.
Nominal Pack Voltage
Throttle
Direction of Forward Rotation
F/R Speed
Full speed clockwise / Half speed counter-clockwise
Full speed counter-clockwise / Half speed clockwise
Full speed clockwise / Full speed counter-clockwise
Application
 
Qty
 


Motor Specs

Brushless Permanent Magnet AC Motor

- 4 pole motor (8 magnets).
- Phase to Phase winding resistance: 0.013 Ohms
- Maximum recommended rotor speed: 5000 RPM
- Voltage: 0 to 96 VDC input to the control
- Torque constant of 0.15 Nm per Amp
- The Inductance Phase to Phase is 0.10 Milli-Henry with a 28 turns per phase.
- Armature Inertia: 45 Kg Cm Squared
- Current: 125 Amps AC continuous (180 Amps DC into the motor control)
- Peak current: 420 Amps AC for 1 minute (600 Amps DC into the motor control)
- Weight: 35 pounds
- Peak Stall Torque: 90 Nm.
- Cooling: Open Frame, Fan Cooled motor
- Includes temperature sensor

P/N: ME1115

PMAC-G9630 96V 300A NEW!
Brushless Drive Kit
 

This system is preassembled, pre-programmed, and bench tested. Please allow 5-10 working days before shipment.


Application:

Small cars, Electrathons, Motorcycles, Scooters, Go-karts, Ride-on Trains, Boats, Robots, Automation, Aeronautics, etc.

Included in Kit:
Motor, Controller, Throttle, Contactor, Key Switch, Forward / Reverse Toggle Switch, Fuse.

Click here for more information >>>
Base Price:
Controller
Sevcon Gen4 96V 300A w/ Regen.
Nominal Pack Voltage
Throttle
Direction of Forward Rotation
F/R Speed
Full speed clockwise / Half speed counter-clockwise
Full speed counter-clockwise / Half speed clockwise
Full speed clockwise / Full speed counter-clockwise
Application
 
Qty