EV Parts > Contactors > Pre-Charge Resistor

Click on an image above to enlarge in a new window ^

Pre-Charge Resistor

24-72 Volts
240 Ohm - 1k Ohms 10 Watts
 



Price: 10.00 USD




Description

A pre-charge resistor is a device that slowly charges the capacitors inside a electronic speed controller before it is powered up. Without this resistor, closing the contactor would generate a large amount of inrush current causing the contacts to arc. This arcing can permanently weld the contacts in the "on" position. The inrush current from not pre-charging can also cause the contact tips to get pitted resulting in a poor connection and diminish vehicle performance.

Specifications

24-72 Volts
240 Ohm - 1k Ohms
10 Watts

Downloads
None.